SprayMAX

Nonionic Spreader Sticker

Item # HSMSPR

PRINCIPAL FUNCTIONING AGENTS:

• Emulsifiable Polyethylene &
  Alkyl Phenoxy Polyethoxy Ethanol: 27.5%
• Constituents Ineffective as Spray Adjuvant: 72.5%
• TOTAL: 100.0%

All ingredients are approved for use under CFR 40, 180.1001 (c & d).

For use with agricultural and industrial, products. Harrell’s Nonionic Spreader Sticker is a highly concentrated low-foam, non-ionic wetter-spreader-activator. Harrell’s Nonionic Spreader Sticker increases the activity and effectiveness of agricultural insecticides, fungicides and herbicides by breaking down the waxy cuticle on the leaf surface and improves adhesion between the pesticide and the plant surface.

Nonionic Penetrant

Item # HSMPEN

PRINCIPAL FUNCTIONING AGENTS:

• Alkyl polyethoxy ethers and other ethoxylated derivatives: 80%
• Constituents ineffective as spray adjuvants: 20%
• TOTAL: 100%

All ingredients are exempt from the requirement of a tolerance under CFR 40, 180.1001(c).

Shake or agitate before use. Harrell’s Nonionic Penetrant is intended for use with pesticides that are labeled for agricultural and non agricultural uses.

Siloxane Surfactant

Item # HSMSUR

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary blend of polyether polydimethyl siloxane copolymers: 99.0%
• Formulation aids considered ineffective as adjuvants: 1.0%
• TOTAL: 100.0%

All ingredients are approved for use under CFR 40, 180.1001(c)

Harrell’s Siloxane Surfactant is a highly effective nonionic wetter/spreader/ penetrant surfactant. The Harrell’s Siloxane Surfactant’s effectiveness may allow the use of the lowest labeled pesticide rate at the lowest recommended surfactant level. Careful observation of spray application is recommended to determine proper and efficient pesticide application. This will optimize the pesticide and surfactant load levels.

Crop Oil Concentrate

Item # HSMCOC

PRINCIPAL FUNCTIONING AGENTS:

• Paraffin base petroleum oil: 60%
• Surfactant blend: 40%
• TOTAL: 100%

All ingredients are exempt from tolerance requirements under CFR 40, 180.1001(c). Contains petroleum distillates.

Harrell’s Crop Oil Concentrate is a blend of a surfactant and a nonphytotoxic superior type of agricultural spray oil designed for use with a broad range of postemergence herbicides as well as desiccants, defoliants, and other pesticides, where an oil concentrate adjuvant is recommended. Harrell’s Crop Oil Concentrate increases the activity of herbicides and, therefore, care should be exercised when herbicide spray containing Harrell’s Crop Oil Concentrate is applied to new varieties or highly inbred lines not previously treated with spray tank adjuvants.

Herbicide Activator

Item # HSMHER

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary blend of nonionic
  surfactant and formulation aids: 65.9%
• Ammonium sulfate: 34.1%
• TOTAL: 100.0%

All ingredients are exempt from tolerance requirements under CFR 40, 180.1001(c).

Harrell’s Herbicide Activator is a highly active ammonium sulfate solution designed to enhance herbicide performance by modifying solution pH and water hardness. The ammoniacal nitrogen in Harrell’s Herbicide Activator has been found to promote herbicide (such as glyphosate) uptake in agricultural applications.Harrell’s Herbicide Activator’s use of high quality spray grade ammonium sulfate eliminates cold water sedimentation and nozzle plugging commonly found with dry AMS.

Fungicide Activator

Item # HSMFUN

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary blend of Hydrocarbyl polyalkylene
  oxides and glycol ethers: 99.5%
• Dimethylpolysiloxane antifoam: 0.5%
• TOTAL: 100.0%

All ingredients are approved for use under CFR 40, 180.1001 (c).

Harrell’s Fungicide Activator is a unique adjuvant technology designed to enhance the performance of both contact and systemic fungicides.

PAR

Item # HSMPAR

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary pigment dispersion and surfactants: 100.0%
• TOTAL: 100.0%

PAR^TM can improve the appearance of turf, increase the efficacy of turf chemicals, and provide a visual spray pattern identification for the applicator. PAR’s proprietary blend will aid in more uniform applications, producing additional consistency of turf chemicals; this includes foliar fertilizers, plant growth regulators (PGR’s), plant protectants, and herbicides.

Defoamer

Item # HSMDEF

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary Emulsifiers and Formulation Aids: 90%
• Proprietary Blend of Dimethylpolysiloxane and other Antifoaming Agents: 10%
• TOTAL: 100%

All ingredients are approved for use under CFR 40, 180.1001(c)

Harrell’s Defoamer is a highly active, nonionic, silicone, defoamer designed to eliminate foam in a variety of applications. The use of Harrell’s Defoamer can control foaming of spray mixtures. The reduction of foam can lessen mixing and filling times and reduce material loss caused by foamingover of spray tanks. Harrell’s Defoamer is a reverse emulsion, oil based formula designed to prevent foam formation as well as provide curative knock down of foam that has previously formed.

Tank Cleaner

Item # HSMTAN

PRINCIPAL FUNCTIONING AGENTS:

• Organic Amine, Inorganic Hydroxides, Surfactants and Formulation Aids: 100%

All ingredients are exempt from the requirement of a tolerance as specified in CFR 40, 180.1001 (c & d).

Shake or agitate before use. Since the amount of residue varies, individual conditions will directly affect use rates of Harrell’s Tank Cleaner. Generally, one gallon treats up to 400 gallons, one quart treats up to 100 gallons. Circulate cleaning solution throughout entire system. Use high pressure spray to clean and rinse interior of spray tank. Purge systems, spray lines and nozzles. Drain and follow with complete rinse, using clean water.

pH Buffer

Item # HSMBUF

PRINCIPAL FUNCTIONING AGENTS:

• Alkyl Polyethoxy Ether: 20.0%
• 2-hydroxy -l, 2,3-propane-tricarboxylic acid: 19.0%
• Dimethyl poly siloxane antifoam: 1.0%
• Formulating aids and inert ingredients: 60.0%
• TOTAL: 100.0%

All ingredients are exempt from the requirements of a tolerance as specified in CFR 40, 180.1001(c).

Harrell’s pH Buffer is a water conditioning agent which promotes herbicide performance by modifying elements such as pH and hardness of the spray water Hard water and high pH can minimize the effectiveness of certain pesticides. Harrell’s pH Buffer positively affects herbicide spray applications.

Green Turf Paint

Item # HSMGTP

PRODUCT INFORMATION:

Harrell’s Green Turf Paint is a specifically formulated concentrated pigment for treating turf. Harrell’s Green Turf Paint can be applied to all types of grass.

• Safe to Use
• Raises Soil Temperature
• Highly Concentrated Formula

Add Harrell’s Green Turf Paint to desired amount of water and agitate continuously. Do not mix any more than the amount that will be used at one time.

Black Pond Dye

Item # HSMBLA

PRINCIPAL FUNCTIONING AGENTS:

• Proprietary blend of water-soluble dyes and stabilizers: 100%

Harrell’s Black Pond Dye is a proprietary blend of environmentally friendly, nontoxic, water-soluble dyes formulated to reduce sunlight penetration and impart a natural black color when applied to ponds, lakes and fountains. Harrell’s Black Pond Dyes are protected by a unique, waterproof, foil-lined over pack to prevent accidental staining while handling.

Harrell’s Black Pond Dye, and its water-soluble packaging, dissolve quickly and are nontoxic to turf grass, birds, mammals, reptiles, fish or other aquatic species. Irrigation, swimming and other recreational uses are approved during and following the use of this product. Applications to chlorinated water may require more frequent treatment.

Blue Pond Dye

Item # HSMBLU

PRODUCT INFORMATION:

Harrell’s Blue Pond Dye is a blended formulation of water-soluble dyes. Harrell’s Blue Pond Dye is designed for use in lakes, ponds, decorative water features and other impounded bodes of water with limited outflow. Harrell’s Blue Pond Dye beautifies murky, cloudy or off-colored water with a pleasing, natural aqua-blue color.

• Always wear rubber gloves when handling Harrell’s Blue Pond Dye
• Pour Harrell’s Blue Pond Dye from the container directly into the water along the shoreline.
• Dispersion of the color will depend on the movement of the water, but should occur within hours of treatment.
• As needed, add additional Harrell’s Blue Pond Dye to the water to maintain the desired coloration of the water.

Blue Spray Indicator

Item # HSMBSI

PRODUCT INFORMATION:

Harrell’s Blue Spray Indicator is a proprietary colorant blend used as a visual aid to help determine what areas have been covered by the applicator. For use with pesticides, fertilizers, and PGR foliar applications on turfgrass and other non-crop vegetation sites with all types of spray equipment.

Harrell’s Blue Spray Indicator leaves a temporary visual identification of the areas already treated by the applicator. Avoid the added cost of overlapping spray applications, and ensure that no areas are being skipped, saving you the time and expense of incomplete applications and re-treatments.

Green Spray Indicator

Item # HSMGSI

PRODUCT INFORMATION:

Harrell’s Green Spray Indicator identifies exactly where your spray is being applied to the turf. It eliminates overlap as much as 50%. It eliminates misses, which is particularly important when a weed or pest is allowed to remain. Harrell’s Green Spray Indicator is nonstaining so it washes off skin, clothing and equipment. It’s temporary, fading in sunlight or washing off with irrigation or rainfall.

Harrell’s Green Spray Indicator:

• is a green liquid colorant
• non-staining colorant technology
• is non-hazardous
• will not permanently stain skin